MARINELINE® & CHEMLINE® COATINGS FOR INDUSTRY

ChemLine® 2400/32

A protective lining for abrasion resistant service at higher temperatures.

ChemLine 784/32

Description

ChemLine® 2400/32 is an abrasion resistant two component ambient or low temperature force cured polymer lining system. ChemLine® 2400/32 is a tough, flexible lining designed to handle the abrasiveness of coal, ore, plastic pellets, slurries and other media.

ChemLine® 2400/32 has excellent chemical resistance capable of withstanding the corrosive attack that normally comes with media handled.

Chemical Resistance

Sulfuric acid to 98%, most solvents including methylene chloride, MEK, methanol, gasohol, distilled water, inorganic acids, dilute organic acids and alkalis. Ideal for corrosive vapor environments.

Industry Applications

  • Hopper cars
  • Slurry pipe
  • Legs of oil platforms
  • Pumps
  • Coal chutes
  • Bag houses
  • Ion exchange vessels

Application Highlights

  • Can be applied to pitted and corroded steel surfaces
  • Very high abrasion resistance
  • Ambient cure
  • Low VOC - 99 grams/L (0.80 lbs.per gallon)
  • Excellent adhesion
  • Good flexibility and toughness
  • Field repairable
  • Steam cleanable
  • Complies with all FDA regulations
  • Resists hydroblasting
  • Dry heat resistance up to 400°F (204°C)

Abrasion Resistance

 

Typical Properties

Stock Colors Gray
V.O.C. Level/Gal. 99 grams/L (0.80 lbs./gal.)
Lead Content Zero
Chromate Content Zero
Pot Life 30 minutes @ 75°F (24°C)
Viscosity Reduction Reduce with Toluene or Xylene
Solids by Volume 91.0%
Recommended Film Thickness (dry) mils average
  Steel: 16 mils (400 microns)
  Concrete: 24 mils (600 microns)
Shelf Life 12 months

 

For product recommendations and technical, application and heat curing information contact Advanced Polymer Coatings'
customer service. Contact +01 440-937-6218.

 

Superior Corrosion and Erosion Resistance Performance


This is Only A Reference Guide
This is an abbreviated listing of the more than 5,000 chemicals that have been tested. This information is intended to serve as a reference guide only. The end user is responsible for determining if ChemLine® is the appropriate coating for the specific application involved. Contact your ChemLine® Representative or the ChemLine® Customer Service Hotline +01 440-937-6218 for detailed specifications prior to any final coatings recommendation or application.

 
ChemLine®
Vinyl Ester
Epoxy (Hibuild)
Rubber
Phenolic (Hibake)
Acetone
A
N
N
N
A
Ammonium Chloride
A
A
A
A
L
Ammonium Hydroxide
A
A
A
A
L
Benzene
A
A
N
N
A
Black Liquor (Paper)
A
A
A
A
L
Bromine Water
A
N
N
N
L
Carbon Tetrachloride
A
A
N
N
A
Chlorine Water
A
A
N
A
N
Chlorobenzene
A
A
A
N
N
Chromic Acid, 20%
A
N
N
A
L
Dichlorobenzene
A
N
N
N
Dimethylformamide
A
N
N
N
A
Ethanol
A
A
A
L
A
Formaldehyde
A
A
A
N
A
Furfural Alcohol
A
L
N
N
A
Gasoline
A
A
A
N
A
Hydraulic Oil
A
A
L
L
A
Hydrochloric Acid, 0-37%
A
A
A
A
L
Hydrofluoric Acid, 40%
A
N
N
N
Hydrofluorosilic Acid
A
L
L
L
L
Jet Fuel
A
A
A
L
A
Kerosene
A
A
A
L
A
Latex
A
L
L
N
A
Methanol
A
L
N
N
A
Methylene Chloride
A
N
N
N
A
MEK
A
L
N
N
A
MIBK
A
L
N
N
A
Nickel Plating
A
A
A
---
A
Slurries
A
L
L
L
L
Sodium Chloride
A
A
A
A
A
Sodium Dichromate
A
L
N
A
N
Sodium Hydroxide
A
N
L
A
N
Sulfite Liquor (Paper)
A
A
A
A
A
Sulfuric Acid, 0-98%
A
N
N
A
A
Tallow
A
N
N
N
A
Toluene
A
A
A
N
A
Trichloroethylene
A
N
N
N
---
White Liquor (Paper)
A
A
A
L
A

 

A = Good at ambient temperatures L = Limited Service N = Not recommended — = No information

 

©2012 0828


The furnishing of the information contained herein does not constitute a representation by Advanced Polymer Coatings (APC) that any product or process is free from patent infringement claims of any third party, nor does it constitute the grant of a license under any patent of APC or any third party. APC assumes no liability for any infringement which may arise out of the use of the product. APC warrants that its products meet the specifications which it set for them. APC DISCLAIMS ALL OTHER WARRANTIES and relating to the products and DISCLAIMS ALL WARRANTIES RELATING TO THEIR APPLICATION expressed or implied INCLUDING but not limited to warranties of MERCHANT ABILITY AND FITNESS for particular purpose. Receipt of products from APC constitutes acceptance of the terms of the Warranty; contrary provisions of purchase orders not withstanding. In the event that APC finds that products delivered are off-specification, APC will at its sole discretion, either replace the products or refund the purchase price thereof. APC’s choice of one of these remedies shall be Buyer’s sole remedy. APC will under no circumstances be libeled upon for consequential damages except in so far as liability is mandated by law. APC will deliver products at agreed upon times in so far as it is reasonably able to do so, but APC shall not be liable for failure to deliver on time when the failure is beyond its reasonable control. For the most current version of this literature, visit www.adv-polymer.com


Download the ChemLine® 2400/32 Brochure PDF